1. Thomas Steiner: Getting started w/ #microformats2 http://microformats.org/2014/03/05/getting-started-with-microformats2 …. @BarnabyWalters, is http://waterpigs.co.uk/php-mf2  100% correct w/ single elem & > 1 type?

    @tomayac for example like this?

    <a class="h-card h-org">Hypothetica Inc.</a>

    php-mf2 gives

        "items": [
                "type": [
                "properties": {
                    "name": [
        "rels": [

    which is correct, one microformat with multiple vocabularies, which effectively allows multiple vocabularies to be mixed, e.g. you can have a h-review which is also an h-entry.

  2. Remote filesystem autocomplete in the terminal never fails to feel a little like the sort of seamless magical consistency across physically separate systems which is so lacking in tech.

  3. Fitted basic optical encode circuit to my , now figuring out optimal settings for calculating wheel speed. Notes:

    Sane gurdy speed of 14 revs every 10 seconds = 1.4 RPS
    52 markers on wheel = 52 * 1.4 = 72.8 transitions per second ≈ 73Hz minimal input signal
    Timer nominal input freq is Fosc / 4 = 4MHz / 4 = 1Mhz
    Max prescaling = 1:256, i.e. TMR0 increments once for every 256 Fosc/4 pulses
    Resultant timer freq = 1Mhz / 256 = 0.00390625 Mhz = 3906.25 Hz
    Input signal has ≈50% duty cycle so periods between pulses should be 1 / 73 = 13.69863014ms
    Period of 3906.25Hz wave = 0.256ms
    Num pulses @ 3906.25Hz after 13.7ms = 13.7 / 0.256 = 53.515625
    1.4 RPS is minimal normal gurdy trompette playing speed, so counting 54 clicks per transition gives a little space for speeding up and a lot of space for slowing down.
    High gurdy trompetting speed of 24 revs per 10 seconds = 2.4 RPS
    TPS = 52 * 2.4 ≈ 124.8 = 125Hz maximum input signal = wavelength of 1 / 125 = 8ms
    Num pulses @ 3906.25Hz after 8ms = 8 / 0.256 = 31.25

    So these values should give a just-wide-enough span of ≈20 ticks between nominal and trompetting speed, with room to halve or potentially even quarter the prescaler if this turns out to not be enough. One advantage of these values is space to track much slower wheel movements, opening this up to be used for slower performance tools as well as speed measuring.

    An external switch could always adjust the prescaler if necessary to cover both use cases.

  4. Jan B.: @BarnabyWalters @ZacharyTong but doesn't work on Debian Squeeze and depends on a specific minor version of PHP

    @bracki pity it doesn’t work on Squeeze (why is that?), as far as I can see it doesn’t depend on a particular version of PHP, just anything greater than 5.3.9 — "php": ">=5.3.9", to be exact.

  5. Black sesame seed ice cream went down well at the office, has replaced chocolate as my favourite ice cream flavour (those of you have eaten ice cream with me will get how big a deal that is)