It is possible, if somewhat awkward, to update the Mooer Ocean Machine firmware on a mac using Wine and a cheap USB MIDI cable.
WARNING: if the firmware update doesn’t complete successfully, it will not permanently brick your unit (as the update can always be attempted again) but the pedal will not work until a firmware is successfully installed! Attempt at your own risk, and definitely not 10 minutes before a gig.
First, download the update from the Mooer website. The update and update software comes in a .rar archive, so you’ll need something like The Unarchiver to unpack it.
You’ll need the latest version of Wine for Mac from winehq.org. I successfully installed the firmware update using 3.0.2. Using version 2.0 consistently failed.
Power on the Ocean Machine in firmware update mode and plug in your USB MIDI cable as specified by the update readme. Check in Audio MIDI Setup that it’s working and recognised. Then, launch the updater using Wine. Select the firmware update file, then click “Update”. You might get a popup window helpfully saying “MIDI Device Error!!”. Try pressing Update again, if you’re lucky it will work. If not, open Terminal and try the following solution.
The problem with (old versions of) Windows, Wine and this updater program is that they rely on the “MIDI device mapper” utility to decide which MIDI device to use. This would be fine, but under Wine for Mac there’s no easy way of seeing a list of devices or configuring which device to use.
It is possible to change the default MIDI device used by the MIDI mapper, by creating a text file with the following code:
#0 is the default device, so start at #1.
I saved mine in MMap.ini. Then, run the following command:
wine regedit MMap.ini
and re-open the update app. If after two presses of Update you still get “MIDI Device Error!!”, then quit the updater, change #1 to #2, run
wine regedit MMap.ini and try again. Repeat until successful. Yes, the update process sucks.